![background image](http://html.mh-extra.com/html/kramer/vp-772/vp-772_user-manual_2001267032.webp)
VP-772 - The Layout
27
27
Split
, where both images are placed
side-by-side with the same height
You can superimpose any input type over any or the same input.
If the HDMI signal is HDCP protected, it can appear on HDMI and
HDBT outputs that are connected to supported HDCP compliant
displays. However, it cannot appear on a display that is not HDCP
compliant and will show a green screen instead.
7.2.1
Setting the PiP
To set the PiP window in the Overlay mode:
1. In the Layout menu select Overlay Settings.
When in the Overlay display mode
2. Select the type of image you want displayed: Picture in Picture, P
Picture, Split or Single Window.
7.2.1.1
Selecting the PiP Source via the Front Panel Buttons
When in the Overlay mode (set only via the OSD menu, see
Section
6.3
), select the
main window by pressing a Program input front panel button and select the PiP
window by pressing a Preview front panel button (see
Figure 14
).
Figure 14: VGA superimposed over HDMI