58
VP-772 - The VP-772 RS-232 Communication Protocol
Network settings commands
Network settings commands require admin authorization
Command
Syntax
Response
Set IP Address
NET-IP
IP_ADDRESS
NET-IP
IP_ADDRESS
RESULT
Read IP Address
NET-IP?
NET-IP
IP_ADDRESS
Read MAC Address
NET-MAC?
NET-MAC
MAC_ADDRESS
Set subnet mask
NET-MASK
SUBNET_MASK
NET-MASK
SUBNET_MASK
RESULT
Read subnet mask
NET-MASK?
NET-MASK
SUBNET_MASK
Set gateway address
NET-GATE
GATEWAY_
ADDRESS
NET-GATE
GATEWAY_ADDRESS
RESULT
Read subnet mask
NET-GATE?
NET-GATE
GATEWAY_ADDRESS
Set DHCP mode
NET-DHCP
DHCP_MODE
NET-DHCP
DHCP_MODE
RESULT
Read DHCP mode
NET-DHCP?
NET-DHCP
DHCP_MODE
DHCP_MODE =
0 (factory default)
– Don't use DHCP (Use IP set by factory or IP set command).
1
– Try to use DHCP, if unavailable use IP as above.
2
– Try to use DHCP, if unavailable use AUTO-IP
Change protocol
Ethernet port
ETH-PORT
PROTOCOL
,
PORT
ETH-PORT
PROTOCOL
,PORT RESULT
Read protocol
Ethernet port
ETH-PORT?
PROTOCOL
ETH-PORT
PROTOCOL
,
PORT
PROTOCOL
= TCP / UDP
(transport layer protocol)
PORT
=
Ethernet port to enter protocol 3000 commands.
1-65535 = User defined port
0 - reset port to factory default (50000 for UDP, 5000 for TCP)