Kramer VP-731, User Manual

Page: 16 / 69

VP-731 - Connecting the VP-731 11
11
3. Connect the video outputs:

The HDMI OUT connector to an HDMI acceptor (for example, a
plasma display)

The PC OUT 1 15-pin HD computer graphics video connector to a video
acceptor (for example, an analog display 1)
In the HDTV mode, the signal goes out via three PINS: PIN 1 is Red or Pr, PIN 2
is Green or Y, PIN 3 is Blue or Pb

The PC OUT 2 15-pin HD computer graphics video connector to a
video acceptor (for example, an analog display 2)
In the HDTV mode, the signal goes out via three PINS: PIN 1 is Red or Pr, PIN 2
is Green or Y, PIN 3 is Blue or Pb
4. Connect the AUDIO OUT 5-pin terminal block and/or the S/PDIF digital audio
output to audio acceptors.
5. Connect the SPKR OUT block connector to a pair of loudspeakers, by
connecting the left loudspeaker to the “L+” and the “L-” terminal block
connectors, and the right loudspeaker to the “R+” and the “R-” terminal block
connectors.
Do not Ground the loudspeakers .
6. Connect the power cord.
We recommend that you use only the power cord that is supplied with this machine
7. If required, connect:

A PC via RS-232, see Section 5.1

The ETHERNET port, see Section 5.2
The USB connector, audio sources and acceptors, and power cord are
not shown in
Figure 3 .
i