KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring and Controlling the VP-725XLA
34
8.1.6
The Geometry Screen
Figure 19
and
Table 11
define the Geometry screen, allowing the user
flexibility in positioning his projector relative to the screening surface.
Figure 19: Geometry Screen
Table 11: Geometry Screen Functions
Setting
Function
Selection/Range
Default
Application
Select the output application
Keystone, Anyplace or Rotation Keystone
Location
Select the location of the display Front, Ceiling, Rear or Rear
ceiling
Front
Horizontal Keystone Adjust the horizontal keystone
1
-40 to 40
0
Vertical Keystone
Adjust the vertical keystone
2
-30 to 30
0
Diagonal Projection Move the location of each corner
of the display separately
3
Top Left, Top Right, Bottom Left,
Bottom Right or Reset (to reset
diagonal projections settings)
Top Left
Pincushion/Barrel
Adjust the pincushion or barrel
appearance of the screen
4
-20 to 20
0
Rotation
Rotate the display clockwise or
counterclockwise (in 1
°
increments)
-180 to 180
0
Reset all
Resets the geometry setting to its default values
Table 12
defines the settings available for each application:
1 If the projector is located at an angle to the left or right of the screen
2 If the projector is located at an angle above or below the screen
3 Horizontally and vertically
4 For projection onto curved surfaces