![background image](http://html1.mh-extra.com/html/kramer/vp-725xla/vp-725xla_user-manual_2002244031.webp)
Configuring and Controlling the VP-725XLA
27
27
8 Configuring and Controlling the VP-725XLA
This section describes how to configure and control the
VP-725XLA
via the:
•
OSD menu (see section
8.1
)
•
LCD display (see section
8.2
)
•
Infrared remote control transmitter (see section
8.3
)
You can also control the
VP-725XLA
via the Ethernet (see section
8.4
)
8.1 Configuring the VP-725XLA via the OSD MENU Screens
The OSD superimposes a menu on the screen from which you can configure
and control each input signal on your
VP-725XLA
, using the MENU, ENTER,
-, +, UP
and DOWN
OSD buttons on the front panel and the remote
transmitter.
To use the OSD menus:
1. Select the desired input signal.
2. Use the menu buttons as follows:
Press the MENU front panel ON button or the MENU key on the
infrared remote control transmitter (see section
8.3
) to display the
main MENU screen
1
, which displays eight interactive icons
2
(see
Figure 12
)
Press the MENU front panel OSD button or the MENU key on the
infrared remote control transmitter to move to the previous level in the
OSD screen (Esc)
Press the + and – buttons to select menu icons and then press ENTER
Use + and – buttons to increase and decrease the (numerical) rate
respectively
Figure 12: MENU Items
1 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2) and a numerical range
2 The Audio menu is not applicable for the VP-725xl