KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-6AHD 1:6 UXGA / Audio / +1 CAT5 Distributor
6
Table 1: Front and Rear Panel Features of the VP-6AHD
#
Feature
Function
1
POWER
Switch
Illuminated switch for turning the unit ON or OFF
2
UXGA EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation
3
LEFT
Trimmer
Adjusts
1
the left output signal level
4
AUDIO
LEVEL RIGHT
Trimmer
Adjusts
1
the right output signal level
5
BAL. AUDIO INPUT
Terminal Block
Connector
Connect to the balanced stereo audio source
6
UXGA INPUT
15-pin HD Connector Connect to the computer graphics (UXGA) source
7
UNBAL/BAL IN SELECT
Button
Selects balanced stereo audio when released; selects
unbalanced stereo audio when pushed in
8
UNBAL. AUDIO
IN 3.5mm Mini Jack Connect to the unbalanced stereo audio source
9
Balanced
AUDIO OUT
Terminal
Block Connectors
Connect to the balanced stereo audio acceptors (from 1 to 6)
10
UXGA
OUT
15-pin HD Connectors Connect to the computer graphics (UXGA) acceptors (from 1 to 6)
11
UNBALANCED AUDIO OUT
3.5mm
Mini Jacks
Connect to the unbalanced stereo audio acceptors (from 1 to 6)
12
LINE OUT
RJ-45
Connector
Connect to
2
the LINE IN RJ-45
connector on a Kramer CAT 5
receiver
3
13
Power Connector with Fuse
AC connector enabling power supply to the unit
Figure 2 and Table 2 define the underside panel switches of the
VP-6AHD
:
Table 2: Underside Features of the VP-6AHD
#
Feature
Function
1
VS
4
Switch
Slide the switch to the right
5
to change
the VS polarity to negative polarity
6
;
slide the switch to the left (Normal) to
retain the polarity
2
HS
4
Switch
Slide the switch to the right
5
to change
the HS polarity to negative polarity
6
;
slide the switch to the left (Normal) to
retain the polarity
3
ID BIT 4
Switch
Slide to the left to set to ON
7
; to the
right to set to OFF
4
ID BIT 11
Switch
Slide to the left to set to ON
7
; to the right
to set to OFF
Figure 2: Underside of the VP-6AHD
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 Using a UTP cable with CAT 5 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6)
3 For example, on the TP-120 XGA Line Receiver. Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110,
which can be downloaded at http://www.kramerelectronics.com
4 SYNC
5 By default, both switches are set to the left
6 Downgoing syncs
7 The default. Enabling the notebook or laptop to output a VGA signal to an external VGA monitor
