Firmware Upgrading
23
9. Click
Run
.
Upon completion of each stage of the operation, the check-box for that
stage turns green
1
.
When the operation is completed, all 4 check-boxes will be colored
green and the status bar message:
Memory Verify Pass
appears
2
:
VP214DS.hex
A
Figure 18: Atmel – Flip Window (Operation Completed)
10. Close the “
Atmel – Flip
” window.
11. Disconnect the power on the
VP-214DS
.
12. If required, disconnect the RS-232
rear panel port on the
VP-214DS
unit
from the Null-modem adapter.
13. Connect the power on the
VP-214DS
.
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
