Connecting a VP-214DS 4 Channel Automatic XGA Switcher
13
6.5.1
MACH. NO. (Machine Number) Dipswitches Setup
The MACH. NO. dipswitches determine the position
1
of a
VP-214DS
machine, when several units connect to a PC or serial controller. Set the
MACH. NO. dipswitches on each
VP-214DS
unit according to Table 8.
Determine the machine number of each connected unit according to the
following guidelines:
When connecting a single unit
2
, set the MACH. NO. dipswitches to 1
When connecting other machines, set the MACH. NO. to subsequent
numbers. For example, set the first unit that is closest to the PC as 1, set
the second unit as 2, and so on
If a remote controller is connected via RS-485 (see section 6.3), set the
MACH. NO. on the first
VP-214DS
unit as 2, set the second unit as 3, and
so on
Table 8: MACH. NO. Dipswitch Settings
DIPS
MACH. NO.
2
3
4
1
OFF
OFF
OFF
2
OFF
OFF
ON
3
OFF
ON
OFF
4
OFF
ON
ON
5
ON
OFF
OFF
6
ON
OFF
ON
7
ON
ON
OFF
8
ON
ON
ON
1 For example, set the second unit to 2, the third unit to 3, and so on (see Figure 9); when operating a single unit, set MACH.
NO. to 1 (the Master unit)
2 Except if controlling via RS-485
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
