KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-214DS
16
7 Operating the VP-214DS
This section describes how to:
Select the Master Source signal (see section 7.1)
Connect the REMOTE connector (see section 7.2)
7.1 Selecting the Master Source Signal
Select the Master Source signal by pressing the appropriate input button
1
.
The
VP-214DS
automatically switches to the Master Source if it is connected
to an active signal. If the Master Source signal is inactive, the machine
automatically switches to the other input signal and once the Master Source
signal becomes active, the machine automatically switches back.
The MANUAL SELECTOR IN button indications are summarized in
Table 9:
Table 9: Input Button Indications
Input Button LED
Master Source
Signal
Red
Yes
No
Blue
No
Yes
Purple (Red +Blue)
Yes
Yes
Not illuminated
No
No
1 Press the IN 1 button to select input 1 to be the Master Source signal; press the IN 2 button to select input 2 as the Master
Source signal (for channels A, B, C, and D)
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203