Your VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter
13
Table 6: VP-5T
1:4 VGA/UXGA Distributor / CAT 5 Transmitter Features
#
Feature
Function
1
POWER
Switch
Illuminated switch for turning the unit ON or OFF
2
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation
3
INPUT
15-pin HD Connector
Connect to the VGA/UXGA source
4
CAT 5 OUT
RJ-45
Connector
Connect to
2
the LINE IN RJ-45
connector on the
VP-5R
CAT 5
Receiver / 1:5 VGA/UXGA Distributor
5
OUTPUT
15-pin HD Connector Connect to the VGA/UXGA acceptor (from 1 to 4)
6
Power Connector with
FUSE
AC connector enabling power supply to the unit
7.2 Your VP-5T/VP5THD (Underside)
Figure 7
and
Table 7
define the underside of the
VP-5T
/
VP-5THD
1:4
VGA/UXGA Distributor / CAT 5 Transmitter
:
Figure 7: VP-5T/VP-5THD
1:4 VGA/UXGA Distributor / CAT 5 Transmitter (Underside)
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in
Table 10
and
Figure 13
)