KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-200XLT
16
Figure 9: VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor
(Underside)
Table 9: VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor
(Underside) Features
#
Feature
Function
1
V SYNC
Switch
Slide the switch to the right
1
to change the V SYNC polarity;
slide the switch to the left to retain the polarity
2
H SYNC
Switch
Slide the switch to the right
1
to change the H SYNC polarity;
slide the switch to the left to retain the polarity
9
Connecting the VP-200XLT
2
You can use the
VP-200XLT
and, for example, the
TP-120
to configure an
XGA Line-
to-Twisted Pair Transmitter and Receiver system.
To
connect the
VP-200XLT
with the
TP-120
, as the example in
Figure 10
illustrates, do the following:
1. On the
VP-200XLT
XGA Line Amp / CAT 5 Transmitter
, connect the:
Computer graphics (XGA) source (for example, a
computer) to the INPUT 15-pin HD connector
XGA OUT 15-pin HD connector to the acceptor (for
example, to a projector)
2. On the
TP-120
XGA Line Receiver
, connect the XGA OUT 15-pin HD
connector to the XGA acceptor (for example, a display).
1 By default, both switches are set to the left
2 This section also applies to the VP-200XLTHD