Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
21
21
8.6 Locking and Unlocking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock
To lock the
VP-1608
:
VP-1608
. Unlocking releases the
protection mechanism.
x
Press the LOCK button for more than two seconds
The front panel is locked and the LOCK button flashes
To unlock the
VP-1608
:
x
Press the LOCK button for more than two seconds
The front panel unlocks and the LOCK button no longer flashes
8.7 Resetting the VP-1608
16x8 RGBHV/Balanced Audio Matrix
You can reset the
VP-1608
unit to the:
x
Current status
(reloads the current setup
x
Factory default (resets to the pre-installed factory default state
)
8.7.1 Resetting to the Current Status
)
You can reset the
VP-1608
unit to the current status (reloads the current
setup)
To reset a
VP-1608
unit to the current status, do the following:
x
Press INPUT buttons 1 and 5 simultaneously for 3 seconds
The
VP-1608
unit resets to the current status, momentarily
displaying
the unit characteristics, as described in section
8.7.2 Resetting to the Factory Default State
You can reset the
VP-1608
unit to the factory default state.
To reset a
VP-1608
unit to the factory default state, do the following:
x
Press OUTPUT buttons 1 and 5 simultaneously for 3 seconds
The
VP-1608
unit resets to its factory default state, momentarily
displaying
the unit characteristics, as described in section
1 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485 serial (remote controller or
PC), as well as via the Kramer RC-IR2 Infra-Red Remote Control Transmitter
2 Sometimes called a “soft reset”
3 Without having to switch the power off and on
4 Each
VP-1608
unit ships in its factory default state that is a 16x8 RGBHV/Balanced Audio Matrix (in audio-follow-video
mode), with all setups empty and each input connected to its corresponding output (for example, 1-to-1)
5 In addition, the unit characteristics also appear immediately (and automatically) after switching on the power