Controlling 16x8 RGBHV/Balanced Audio Matrix Units
15
15
1. Connect the video sources and acceptors, the appropriate audio sources and
acceptors, and the power cord to each
VP-1608
unit.
2. On each
VP-1608
unit, set the MACHINE # DIP-switches, as required. For
example, set the first
VP-1608
unit to MACHINE # 2, the second
VP-1608
unit to MACHINE # 3, and so on, up to MACHINE # 8 for the seventh
VP-
1608
unit (see section
3. Terminate the RS-485 line on both the
RC-3000
4. Connect the RS-485 ports on the
RC-3000
to the RS-485 ports on each of
the
VP-1608
units, as follows:
VP-1608
unit (set DIP 4 to ON).
Connect the “A” (+) PIN on the RS-485 rear panel port of the
RC-3000
to the “A” (+) PIN on the RS-485 rear panel ports of
the
VP-1608
units
Connect the “B” (-) PIN on the RS-485 rear panel port of the
RC-3000
to the “B” (-) PIN on the RS-485 rear panel ports of
the
VP-1608
units
If shielded twisted pair cable is used, the shield may be
connected to the “G” (Ground) PIN on one of the units (for
example, on the
RC-3000
)
1 Refer to the RC-3000 user manual for details of how to terminate the RS-485 line