![background image](http://html1.mh-extra.com/html/kramer/vm-24hdmi/vm-24hdmi_user-manual_2001655011.webp)
Using the VM-24HDMI
9
6 Using the VM-24HDMI
This section describes how to:
Connect the
VM-24HDMI
, see section 6.1
Control the
VM-24HDMI
via RS-232, see section 6.2
Operate the
VM-24HDMI
, see section 6.3
Use the EDID button, see
section 6.4
6.1 Connecting the VM-24HDMI
To connect the
VM-24HDMI
, as illustrated in the example in Figure 2, do the
following
1
:
1. Connect
2
the two HDMI sources, for example, a DVD player and a set top
box, to the INPUT 1 and INPUT 2 connectors, respectively.
2. Connect the HDMI OUTPUT connectors
3
to up to 4 HDMI acceptors, using
Kramer HDMI copper cables. In this example
4
, connect the:
OUTPUT 1 connector to acceptor 1 (for example, a plasma display)
OUTPUT 2 connector to acceptor 2 (for example, an LCD TV)
OUTPUT 3 connector to acceptor 3 (for example, an LCD TV)
OUTPUT 4 connector to acceptor 4 (for example, a plasma display)
3. If required, connect a PC and/or controller to the RS-232 port (see section 6.2).
4. Connect the power cord to the mains electricity (not shown in Figure 2).
5. If required, acquire the EDID (see section 6.4).
1 Switch OFF the power on each device before connecting it to your VM-24HDMI. After connecting your VM-24HDMI,
switch on its power and then switch on the power on each device
2 Using the Kramer HDMI copper cables
3 As required. Up to four outputs can be connected. Not all outputs need to be connected
4 Only connections from the first two acceptors and the last two acceptors are shown in Figure 2