KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-24HDMI
12
6.4 Using the EDID Buttons
You can acquire the EDID from:
One Output (the selected output LED blinks)
The Default EDID (all the output LEDs blink)
Several Connected Outputs, the Auto-mix Mode
1
(the output LEDs blink
in sequence)
To cycle between the different modes (One Output, Default and Auto-mix),
as defined in Table 2, press the EDID SELECT button
Table 2: The EDID Modes
Current
EDID Mode
Appearance
To cycle to the
Default EDID
To cycle to the Auto-
mix EDID
To cycle to the One
output EDID
One Output
The selected
output LED
blinks
Press the EDID
SELECT button once
again after selecting
output 4.
The output LEDS blink
Default
The output
LEDs blink
simultaneously
Press the EDID
SELECT button once
Auto-mix
All the output
LEDs light
Press the EDID
SELECT button to
select the required
output. The selected
output blinks
To acquire or change the EDID of a new output display from:
One output, see section 6.4.1
The default EDID, see section 6.4.2
Several connected outputs, see section 6.4.3
6.4.1
Acquiring / Changing the EDID from One Output
To acquire or change the EDID of one of the output displays:
1. Connect the power supply.
2. Connect the new output display device.
3. Press the EDID SELECT button, enter the One output mode as defined in
Table 2, and set to the connected output.
The appropriate OUTPUT STATUS LED blinks, indicating that that
output channel is selected.
1 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different
resolutions are connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included
in the EDID