Kramer Electronics Ltd.
VIA Connect
– For Web Administrator: Configuring Settings – Gateway Management Pages
37
4. Select an image or video file and click
Upload
.
The file is added and appears in the Existing Media table.
Adding Fonts to Digital Signage
To add new fonts to Digital Signage:
1. Click
Digital Signage
>
DSS Management
on the navigation pane.
The DSS Management page appears with the License Management tab open.
2. Click
Font Management
.
The Font Management tab appears.
3. Click
Browse File
.
A file browser appears.
4. Open the relevant font file and click
Upload
.
The new font is installed on
VIA Connect
and can be used for Digital Signage.
Creating Custom Digital Signage Templates
Templates dictate the layout of the digital signage content. Up to 3 frames of content can be
displayed at once.
VIA Connect
enables you to use predefined templates and to create
custom templates.
To create a custom digital signage template:
1. Click
Digital Signage
>
Template Manager
on the navigation pane.
The Template Manager page appears with Custom Templates tab open.
The Pre-Defined Templates tab explains all the pre-defined templates that are available
when you create a campaign
2. Click
Custom Templates
.
The Custom Templates tab appears.
3. Click
Add Template
.
The Add Template pane appears.
4. Type a name for the new template in the Template Name text box.
5. Click and drag one of the frames into preview box.
The frame parameters for the frame appear below the preview.
6. Click and drag the box to move and resize it.
7. Select the
Audio
checkbox to play audio from the selected frame.
Only one frame can include audio.
8. Repeat steps 5
–9 to add up to two more frames.
The layering order of the frames, from bottom to top is Frame 1, Frame 2, Frame 3.