Kramer Electronics Ltd.
TP-600TRxr
– Defining TP-600TRxr 4K60 HDMI/USB Extender
4
Defining TP-600TRxr 4K60
HDMI/USB Extender
This section defines
TP-600TRxr and TP-600TR
.
The extender device functions as a transmitter or receiver as defined by the SETUP
DIP-switch 1 setting on the rear panel (see
).
Figure 1: TP-600TRxr 4K60 HDMI/USB Extender Front Panel
Figure 2: TP-600TR 4K60 HDMI/USB Extender Front Panel
#
Feature
Function
HOST USB B 2.0
Connector
Connect to the USB host (for example, a laptop) to communicate with the USB
peripheral devices (for example, a smart board) connected to USB device ports
on either the transmitter or the receiver sides of the extender (see
).
ACTIVE HOST
LED
Lights orange when the USB host side is active
ACTIVE Rx LED
Lights green when the extender receiver function is active
IN LED
Lights blue when an active HDMI input signal is detected on HDMI IN.
OUT LED
Lights blue when an output acceptor device is connected.
TX LOOP
Transmitter mode
Lights blue an active signal is transmitted on the Tx LOOP
port.
Receiver mode
N/A
LINK LED
Lights green when the HDBT active link connection is established.
ON LED
Lights green when the device receives power.
1
2
3
4
5
6
7
8
