Kramer Electronics Ltd.
TP-600TRxr
– Connecting the 4K60 HDMI/USB Extender
7
Connecting the 4K60 HDMI/USB
Extender
You can use two
TP-600TRxr
units, define them as transmitter and receiver and then connect
the transmitter to the receiver (as described in this section). You can also connect the device
to a different unit. For example:
•
Connecting
TP-600TRxr
that is set as a transmitter to the Kramer
TP-590R
receiver.
•
Connecting a transmitter (for example, the Kramer
TP-590T
transmitter) to a
TP-600TRxr
that is set as a receiver.
•
Connecting the
TP-600TRxr
(defined as a transmitter or receiver to a switcher or other
system, for example, the
VS-84UT
).
This section describes the following actions:
•
•
•
Connecting to TP-600TRxr via RS-232
•
Error! Reference source not found.
on page
Error! Bookmark not defined.
.
•
Always switch off the power to each device before connecting it to your
TP-600TRxr
. After
connecting your
TP-600TRxr
, connect its power and then switch on the power to each
device.
Connecting TP-600TRxr
Figure 5: Connecting to TP-600TRxr
