TP-576 - Connecting the TP-576
7
4
Connecting the TP-576
Always switch off the power to each device before connecting it to your
TP-576
. After connecting your
TP-576
, connect its power and then
switch on the power to each device.
To
connect the
TP-576
together with the
TP-573
HDMI/RS-232/IR Line
Transmitter
and the
TP-574
HDMI/RS-232/IR Line Receiver
, as illustrated in the
example in
Figure 2
, connect the following:
On the
TP-573
connect:
1. An HDMI source (for example, a DVD player) to the HDMI IN connector.
2. An IR sensor or emitter to the IR 3.5mm mini jack connector (see
Section
4.2
).
3. A PC to the RS-232 9-pin D-sub connector.
Alternatively, you can connect an RS-232 controllable device to the RS-232
port of the
TP-573
and a PC to the RS-232 port of the
TP-574
.
4. A CAT 5 or CAT 6 cable to the LINE OUT RJ-45 twisted pair connector.
On the
TP-576
connect:
1. An HDMI source (for example, a DVD player) to the HDMI INPUT 1
connector.
2. The CAT 5 or CAT 6 cable from the
TP-573
to the INPUT 2 RJ-45 twisted
pair connector (to power the
TP-576
as well as the
TP-573
and
TP-574
).
3. An IR sensor or emitter to the REMOTE IR 3.5mm mini jack connector (see
Section
4.2
).
4. The 12V DC power supply to the
TP-576
(not shown in
Figure 2
) (to power
the
TP-576
as well as the
TP-573
and
TP-574
)
i
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203