![background image](http://html.mh-extra.com/html/kramer/tp-576/tp-576_user-manual_2002028009.webp)
6
TP-576 - Overview
3.3
Defining the TP-576 HDMI/CAT 5 Line Driver
This section defines the
TP-576
.
Figure 1: TP-576 HDMI/CAT 5 Line Driver
#
Feature
Function
1
IR
Receiver
The yellow LED lights when receiving signals from the
infrared remote control transmitter
2
EDID SETUP
Button
Press briefly to determine the type of EDID stored in the
non-volatile memory
Press and hold to select the desired EDID setup and then
release to acquire EDID (see
Section
5.4
)
3
INPUT SELECT
Button
Press to select the input. The relevant IN LED illuminates
4
IN
1
LED
Illuminates when input 1 is selected
5
IN
2
LED
Illuminates when input 2 is selected
6
OUT 1
LED
Illuminates when output 1 is connected and active
Flashes when the monitor does not support HDCP
This LED also illuminates or flashes during EDID setup
(see
Section
5.4
)
7
OUT 2
LED
Illuminates when output 2 is connected and active
Flashes when the monitor does not support HDCP
8
ON
LED
Illuminates when receiving power
9
INPUT 1
HDMI Connector
Connects to the HDMI source
10
INPUT 2
RJ-45
Connector
Connects to the CAT 5 IN RJ-45 connector on the
TP-573
or
TP-571
11
OUTPUT 1
RJ-45
Connector
Connects to the CAT 5 IN RJ-45 connector on the
TP-574
or
TP-572+
12
OUTPUT 2
HDMI Connector
Connects to the HDMI acceptor
13
RS-232
9-pin D-sub Connector
Connects to a PC or other controller
14
REMOTE IR
3.5mm Mini Jack
Connects to an infrared receiver/emitter
Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or
C-A35M/IRE or C A35M/2IRE
15
12V DC
+12V DC connector for powering the unit
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203