![background image](http://html.mh-extra.com/html/kramer/tp-576/tp-576_user-manual_2002028013.webp)
10
TP-576 - Connecting the TP-576
4.1
Connecting to the TP-576 via RS-232
You can connect to the
TP-576
via an RS-232 connection using, for example, a
PC. Note that a null-modem adapter/connection is not required.
To connect to the
TP-576
via RS-232, connect the RS-232 9-pin D-sub rear panel
port on the
TP-576
unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3,
and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your PC.
4.2
Connecting an IR Emitter/Sensor
The
TP-576
consists of an IR receiver and a REMOTE IR 3.5mm mini jack
connector that can connect to either an emitter or receiver.
In a transmitter-receiver configuration that includes, for example, the
TP-573
and
TP-574
, IR control behavior is determined by the IR items (emitter or receiver) that
are connected to the REMOTE IR or IR (for the
TP-573
and
TP-574
) 3.5mm mini
jack connectors.
To control any device in this configuration, use the appropriate IR remote control
transmitter. For example, the Kramer remote controller will be able to control
Kramer devices. For controlling an LCD display you will need to use the LCD
remote controller unit, and so on.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203