![background image](http://html1.mh-extra.com/html/kramer/rc-7b/rc-7b_user-manual_2000909004.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The
RC-7B
/
RC-7BE
is a highly versatile controller interface panel for the
control of A/V equipment in any multimedia room, especially the control of
a projector or other display device, via RS-232 and/or IR emitter cable. The
RC-7B
/
RC-7BE
is 12V DC fed. The
RC-7B
is a one-gang wall plate. The
RC-7BE
is two-gang wall plate intended for the European market.
In particular, the
RC-7B
/
RC-7BE
features:
VOLUME Up and VOLUME Down buttons
ON, OFF, PC, DVD and VCR buttons, each of which can be
programmed to carry out up to 15 commands, in sequence, with one
press of a button
In addition, the
RC-7B
/
RC-7BE
includes:
Two IR ports
Two RS-232 serial ports for universal display
An RS-485 serial port
A 3.5mm CONFIG jack connector on the front panel for RS-232
configuration and control
An IR learner on the front panel for the customized control of external
sources, absorbing the IR commands from different remote transmitters
Control via the front panel buttons, and remotely, via RS-232
To achieve the best performance:
Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise- levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
the
RC-7B
/
RC-7BE
away from moisture, excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
1
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example: model number AD2512C, part number 2535-000251