![background image](http://html1.mh-extra.com/html/kramer/rc-7b/rc-7b_user-manual_2000909005.webp)
Your RC-7B / RC-7BE
3
4 Your RC-7B / RC-7BE
This section defines the:
Front panel of the
RC-7B
(see section 4.1)
Front panel of the
RC-7BE
(see section 4.2)
Side panel of the
RC-7B
and
RC-7BE
(see section 4.3)
4.1 Defining the RC-7B Front Panel
Figure 1 and Table 2 define the
RC-7B
front panel:
Figure 1: RC-7B Front Panel
Table 1: RC-7B Front Panel
# Feature
Function
1 ON Button
Turns ON the power to the
display device
1
2 Mounting
holes (2)
For fastening the controller
in place
3 OFF Button
Turns OFF the power to
the display device
1
4 Faceplate
Attachment
Holes (2)
For attaching the faceplate
to the controller
2
5 CONFIG Port
3
on 3.5mm jack
connector
Used for Windows®-based
configuration software
(driver downloads, firmware
updates and so on)
6 VCR Button
Selects the VCR input
source
7 DVD Button
Selects the DVD input
source
8 PC (includes
Mac) Button
Selects the PC input
source (desktop or laptop
computer)
9 IR IN
Receiver
Accepts IR remote
commands (for the
IR-learner feature)
4
10 VOLUME
Button
Press to lower the volume
on the audio amplifier
11 VOLUME
Button
Press to raise the volume
on the audio amplifier
4.2 Defining the RC-7BE Front Panel
Figure 2 and Table 2 define the
RC-7BE
front panel:
1 For example, the projector or plasma display panel
2 These screws should not be removed during or after mounting
3 Via the front panel, without having to remove the RC-7B from its mounting
4 Letting you configure the RC-7B directly from the remote transmitter without the need for software