KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Media / Room Controller
10
5.2 Using the Macro Buttons
Pressing any button initiates a macro sequence
1
, during which the button
blinks (as programmed by the system integrator). If during the macro
sequence the button blinks faster than usual
2
, this indicates that a malfunction
has been detected
3
and the
RC-7B
/
RC-7BE
exits the macro sequence.
To stop a macro sequence, press and hold that button for 5 seconds. The
sequence will come to an end. You can resume operation by pressing any of
the buttons
4
. The unit will carry out the macro sequence commands from the
beginning.
5.3 An Example of Operating the RC-7B / RC-7BE
Figure 8 shows an example of how to operate the
RC-7B
/
RC-7BE
:
Figure 8: RC-7B / RC-7BE Operation Example
1 The macro sequence can be carried out instantly or can take a while, depending on the delay times included in the sequence
2 Six times per second, as compared with twice per second during normal operation
3 For example, when pressing ON to power up the projector while the projector is still in the power down process
4 Including the button you kept pressed to stop the macro sequence
