Using Your Media / Room Controller
9
Figure 7: Example of a Typical Setup in the Lecture Auditorium
5.1 Operating the RC-7B / RC-7BE
In the example defined in Table 3, the buttons—ON, OFF, PC, DVD and
VCR—are programmed by the system integrator to perform several tasks
1
.
Table 3: The Commands Configuration
ON Button Macro Sequence
1.
Power up the projector
4.
Brief delay for the projector to heat up
2.
Power up the DVD
5.
The projector selects the PC input
3.
Power up the VCR
OFF Button Macro Sequence
1.
Power down the projector
4.
Stop the VCR
2.
Stop the DVD
5.
Power down the VCR
3.
Power down the DVD
DVD Button Macro Sequence
1.
Stop the VCR
3.
Play the DVD
2.
The projector selects the DVD input
VCR Button Macro Sequence
1.
Stop the DVD
3.
Play the VCR
2.
The projector selects the VCR input
PC Button Macro Sequence
1.
Stop the DVD
3.
The projector selects the PC input
2.
Stop the VCR
1 A macro sequence, including up to 15 commands per button, carried out in sequence with one press of a button
