RB-6 - RB-6 Communication Protocol
31
31
12.1.7
Command Chaining
Multiple commands can be chained in the same string. Each command is
delimited by a pipe character ( '|' ). When chaining commands, enter the
message
starting character
and the
message closing character
only once, at the
beginning of the string and at the end.
Commands in the string do not execute until the closing character is entered.
A separate response is sent for every command in the chain.
12.1.8
Maximum String Length
64 characters
12.1.9
Backward Support
Protocol 2000 is transparently supported by Protocol 3000. You can switch
between protocols using a switch protocol command from either platform.
12.2
Supported Commands
For details regarding the commands, see the Kramer Protocol 3000 document.
The latest version of the document is available from
http://www.kramerelectronics.com
.
The following commands are supported by the
RB-6
.
Command
Description
Permission
#
Protocol handshaking
End User
BUILD-DATE?
Read device build date
End User
DIM_RANGE
Set the dimmer range
DIM_RANGE?
Read the dimmer range
DIM-VALUE
Set the dimmer value
DIM-VALUE?
Read the dimmer value
ETH-PORT
Change protocol Ethernet port
Administrator
ETH-PORT?
Get protocol Ethernet port
End User
FACTORY
Reset to factory default configuration
HELP
List of commands
End User
LDFW
Load new firmware
User SW Internal
MODEL?
Read device model
End User
NAME
Set machine (DNS) name
Administrator
NAME?
Get machine (DNS) name
End User
NAME-RST
Reset machine name to factory default (DNS)
Administrator
NET-DHCP
Set DHCP mode
Administrator
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
