![background image](http://html1.mh-extra.com/html/kramer/rb-6/rb-6_user-manual_2001816018.webp)
14
RB-6 - Connecting the RB-6
Figure 8: Device Properties Screen
7. Change the parameters as required.
8. To save the changes, click
Save
. To exit without saving the changes, click
Exit
.
6.3
Connecting to the RB-6 via RS-232
You can connect to the unit via a crossed RS-232 connection, using for example,
a PC. A crossed cable or null-modem is required as shown in method A and B
respectively. If a shielded cable is used, connect the shield to pin 5.
Method A
(
Figure 9
)
—Connect the RS-232 9-pin D-sub port on the unit via a
crossed cable (only pin
2
to pin
3
, pin
3
to pin
2
, and pin
5
to pin
5
need be
connected) to the RS-232 9-pin D-sub port on the PC.
Note:
There is no need to connect any other pins.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203