![background image](http://html1.mh-extra.com/html/kramer/pt-571hdcp/pt-571hdcp_user-manual_2000972007.webp)
4
PT-571HDCP/PT- - Overview
3
Overview
The
PT-571HDCP
is a DGKat™ twisted pair transmitter for DVI signals. The
PT-571HDCP
converts a DVI signal to a single twisted pair signal and the
PT-
converts the twisted pair signal back to a DVI signal.
The
DVI Line Transmitter/Receiver
system features:
Maximum data rate/bandwidth up to 4.95Gbps (1.65Gbps per graphic
channel), WUXGA, 1920x1080p
HDTV compatibility and HDCP compliance
Medical equipment compliance
EDID PassThru that passes EDID signals between the source and display
3D pass-through
Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded
BC−DGKat524
cable. Up to 90m (295ft) at SXGA, or up to 70m (230ft) at
UXGA on shielded
BC−DGKat623
cable. Up to 100m (330ft) at SXGA, or up
to 80m (265ft) at UXGA on shielded
BC−DGKat7a23
cable
Note that the transmission range depends on the signal resolution, graphics card and
display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may
not reach these ranges
DGKat™ Signal Integration – Kramer’s unique technology for converting
TMDS as well as control and communication to signals that run over twisted
pair cables
Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter
to receiver (see
Section
Ultra-
Compact Pico TOOLS™ – 4 units can be rack mounted side−by−side
in a 1U rack space with the optional
Use only shielded cable where both ends of the shield are soldered
to ground to eliminate ESD interface.
i