8
PT-571HDCP/PT- - Connecting the Transmitter Receiver Pair
6
Connecting the Transmitter Receiver Pair
Always switch off the power to each device before connecting it to your
Transmitter and Receiver pair. After connecting your Transmitter and
Receiver pair, connect the power and then switch on the power to
each device.
You can use the
PT-571HDCP
DVI Line Transmitter
with the
PT-
DVI
Line Receiver
to configure a DVI transmitter/receiver system.
To
connect the
PT-571HDCP
to the
PT-
, as illustrated in the example
, do the following:
1.
Connect the CAT 5 OUT RJ-45 connector on the
PT-571HDCP
to the
CAT 5
IN RJ-45 connector on the
PT-
via a CAT 5 cable (see
Section
).
2.
On the
PT-571HDCP
, connect a DVI source (for example, a computer
graphics source) to the DVI IN connector.
3.
On the
PT-
, connect the DVI OUT connector to a DVI acceptor
(for example, a display).
4.
Connect the 12V DC power adapter to the power socket on the
PT-571HDCP
and/or the
PT-
and connect the adapter to the
mains electricity (not shown in
!
