TBUS-3xl - Installing the TBUS-3xl
9
9
5.1.1
Mounting the Inserts
You can rearrange or remove any of the plates mounted on the inner frame and
replace them with Kramer passive wall plates or connector modules for interfacing
A/V type signals.
To mount a Kramer insert or connector module:
1. Unscrew the two screws that fasten the blank plate to the inner frame and
remove the blank plate.
2. Place the required Kramer insert over the opening, insert the two screws to
fix the Kramer insert in place, and tighten them.
Figure 3: TBUS-3xl
Inner Frame (P/N: 80-003099)
#
Feature
Function
1
Blank Plates
Three blank covers that can be replaced with wall
plates as required
2
Adjustable Height Screw Holes For adjusting the height of the Inner frame
5.1.2
Mounting the Power Socket Assemblies
To mount the power socket, place the power socket under the frame in its
appropriate place and tighten with the two screws (supplied).
i
Power socket kits come with assembly instructions.
