1/8” (3.2mm)
CABLE GLAND
INSTRUCTIONS
For Cable Gland Part #
CG20P-G
CG30P-G
CGM17P-G
CG20A-B
CG30A-B
CGM17A-B
CG20-SS
CG30-SS
CGM17-SS
Tools Needed
2mm
Place the plastic base onto
the rubber base gasket.
Be sure to line up the four
screw holes.
Line up the Cable Gland
cover with the four holes in
the plastic base and screw
the bolts in with a allen
wrench.
Measure your cable diameter and select the
appropriate drill bit.
Apply some marine
sealant to the threads of
the screws. Screw in the
four screws using a philips
head screw driver.
Insert the rubber gromet
into the plastic base.
Petroleum Jelly
1
2
4
5
3
Make sure that you
do not drill within
1/8” (3.2mm) from
the edge of the
rubber grommet.
TIP
