![background image](http://html1.mh-extra.com/html/kramer/kds-sw2-en7/kds-sw2-en7_user-manual_2001590062.webp)
Kramer Electronics Ltd.
KDS-SW2-EN7
– Protocol 3000
60
Protocol 3000 Commands
Function
Description
Syntax
Response
Parameters/Attributes
Example
#
Protocol
handshaking.
NOTE:
Validates the
Protocol 3000
connection and gets
the machine number.
Step-in master
products use this
command to identify
the availability of a
device.
#
<CR>
~nn@ ok
<CR><LF>
#
<CR>
BEACON-EN
Set beacon rate.
#BEACON-EN
port_id,status,rate
<CR>
~nn@BEACON-EN
port_id,status,rate
<CR><LF>
port_id
– ID of the Ethernet port
0
– Media Port
1
– Service Port
status
– Enable/Disable beacon
0
– Disable (default)
1
– Enable
rate
– Repetition rate in seconds
1
– 1 second (minimum)
10
– 10 seconds (default)
1800
– 30 minutes (maximum)
Set media port beacon
information to 10 seconds:
#BEACON-EN 0,0,10
<CR>
BEACON-
INFO?
Get beacon
information, including
IP address, UDP
control port, TCP
control port, MAC
address, model,
name.
NOTE:
There is no
Set command. Get
command initiates a
notification.
#BEACON-INFO? port_id
<CR>
~nn@BEACON-INFO
port_id,ip_string,udp_port,tcp_
port,mac_address,model,name
<CR><LF>
port_id
– ID of the Ethernet port
0
– Media Port
1
– Service Port
ip_string
– Dot-separated
representation of the IP address
udp_port
– UDP control port
tcp_port
– TCP control port
mac_address
– Dash-separated
mac address
model
– Device model
name
– Device name
Get beacon information:
#BEACON-INFO? 0
<CR>
BUILD-
DATE?
Get device build
date.
#BUILD-DATE?
<CR>
~nn@BUILD-DATE
date,time
<CR><LF>
date
– Format: YYYY/MM/DD where
YYYY = Year
MM = Month
DD = Day
time
– Format: hh:mm:ss where
hh = hours
mm = minutes
ss = seconds
Get the device build date:
#BUILD-DATE?
<CR>
CEC-GW-
PORT-
ACTIVE
Set CEC Gateway
mode - Whether
CEC commands
coming from HDMI
stream
(passthrough) or
from LAN.
#CEC-GW-PORT-ACTIVE
gateway
<CR>
~nn@CEC-GW-PORT-ACTIVE
gateway
<CR><LF>
CEC mode
0
– CEC Passthrough mode
1
– CEC Gateway mode –
command to be to be sent to HDMI
Input.
2
– CEC Gateway mode –
command to be to be sent to HDMI
Output.
3
– CEC Gateway mode –
command to be sent to HDMI Loop
Through
Set CEC Gateway mode:
#CEC-GW-PORT-ACTIVE
1
<CR>
CEC-NTFY
Notify about CEC
command retrieved
from bus.
NOTE:
Notification is
sent to all com ports
upon CEC message
retrieval from CEC
bus.
#CEC-NTFY
<CR>
~nn@CEC-NTFY
port_index,len,<cec_command
…>
<CR><LF>
port_index
– CEC port notifying the
command
len
– 1–16
cec_command
– CEC format
command (in HEX format, no
leading zeros, no ‘0x’ prefix)
Notify about CEC command
retrieved from bus.:
#CEC- NTFY 0F36
<CR>
CEC-SND
Send CEC command
to port.
#CEC-SND
port_index,sn_id,cmd_name,cec_le
n,cec_command
<CR>
~nn@CEC-SND
port_index,sn_id,cmd_name,ce
c_mode
<CR><LF>
port_index
– CEC port transmitting
the command (1
– number of ports)
sn_id
– serial number of command
for flow control and response
commands from device
cmd_name
– command name
cec_len
– 1–16
cec_command
– CEC format
command (in HEX format, no
leading zeros, no ‘0x’ prefix)
cec_mode
– CEC mode
0
– Sent
1
– Gateway disabled
2
– Inactive CEC-Master
3
– Busy
4
– Illegal Message Parameter
5
– Illegal CEC Address Parameter
6
– Illegal CEC Command
7
– Timeout
8
– Error
Send CEC command to port:
#CEC-SND
1,1,1,2,E004
<CR>
COM-
ROUTE-ADD
Add a
communication route
tunnel connection.
#COM-ROUTE-ADD
com_id,port_type,port_id,eth_rep_e
n,timeout
<CR>
~nn@COM-ROUTE-ADD
com_id,port_type,port_id,eth_r
ep_en,timeout
<CR><LF>
com_id
– Machine dependent
port_type
– TCP/UDP
0
– TCP
1
– UDP
port_id
– TCP/UDP port number
(5000
– 5999)
eth_rep_en
– Ethernet Reply
0
– COM port does not send replies
to new clients
1
– COM port sends replies to new
clients.
timeout
– Keep alive timeout in
seconds (1 to 3600)
Add a communication route
tunnel connection:
#COM-ROUTE-ADD
1,1,1,1,1
<CR>
COM-
ROUTE-
REMOVE
Remove a
communication route
tunnel connection.
#COM-ROUTE-REMOVE
com_id
<CR>
~nn@COM-ROUTE-REMOVE
com_id
<CR><LF>
com_id
– Machine dependent
Remove a communication
route tunnel connection:
#COM-ROUTE-REMOVE
1
<CR>