KDS-EN1 - Operating the KDS-EN1 Using the Web Pages
19
8
Operating the KDS-EN1 Using the Web
Pages
The embedded Web pages can be used to remotely operate the
KDS-EN1
using
a Web browser and an Ethernet connection over a LAN. The menu appears on
the left side of the screen. There are ten Web pages:
•
Video Settings Page (see
Section 8.1.1
)
•
Audio Settings Page (see
Section 8.1.2
)
•
System Settings Page (see
Section 8.1.3
)
•
TS/IP Settings Page (see
Section 8.1.4
)
•
Host IP Settings Page (see
Section 8.1.5
)
•
System Information Page (see
Section 8.1.6
)
•
Saving the Default Configuration Page (see
Section 8.1.7
)
•
Loading the Default Configuration Page (see
Section 8.1.8
)
•
Load the Factory Defaults Page (see
Section 8.1.9
)
•
Software Upgrade Page (see
Section 8.1.10
)
After making changes on any of the pages click Save to save the changes.
8.1 Accessing the KDS-EN1 Web Pages
To access the KDS-EN1 Web pages
:
1. Open your Internet browser.
2. Enter the IP address of the device (see
Section 10
) in the address bar of
your browser (see
Figure 8
).
Figure 8: Web Browser Address Bar
The home page similar to that shown in
Figure 9
appears.