KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons
17
7.2.6
Advanced Sub-menu
The parameters in the Advanced Settings sub-menu allow you to save and load
configurations, reset to factory defaults, and display the codec version.
Parameter
Description
Save Default
Save the current configuration as the default configuration
Load Default
Load the default configuration
Restore Initial
Load the factory default configuration
Codec Version
Displays the codec version
7.3
Changing the Video Input Selection
To change the video input selection
:
1. Press the Enter button to display the menu.
The menu is displayed.
2. Press the Enter button to select the Video Input sub-menu.
The Video Input sub-menu is displayed.
3. Press the Enter button to enable changing the parameter.
The current video input selection flashes.
4. Using the right (►) or left (◄) button, move through the parameter options
until the required video input is displayed.
5. Press Enter to save the selection.
The “Updating …” message flashes for a few seconds and the change is
saved.
Note
: If the media player does not display correctly following input resolution or
selection changes, refresh the media player.
7.4
To Reset the Device to Factory Default Configuration
To reset the device to the factory default configuration
:
1. Press Enter.
The menu is displayed.
