![background image](http://html1.mh-extra.com/html/kramer/kds-en1/kds-en1_user-manual_2001588012.webp)
KDS-EN1 - Connecting the KDS-EN1
9
3. Connect the SDI source (for example, a video camcorder) to the SD/HD-SDI
INPUT BNC connector.
4. Connect the HDMI source (for example, a DVD player) to the HDMI INPUT
connector.
5. Connect the ASI OUT A BNC connector to the ASI acceptor (for example,
an H.264 decoder).
6. Connect the IP OUT RJ-45 connector to the IP acceptor (for example, an IP
set top box).
7. Optional—Connect a PC controller via a LAN to the CONTROL RJ-45
Ethernet connector.
6.1
Connecting to the KDS-EN1 via Ethernet
You can connect the
KDS-EN1
via Ethernet via either of the following methods:
•
A crossover cable (see
Section 6.1.1
) for direct connection to the PC
•
A straight through cable (see
Section 6.1.2
) for connection via a network hub
or network router
After connecting the Ethernet port, you have to install and configure your Ethernet Port. For
detailed instructions, see the Ethernet Configuration Guide (Lantronix) in the technical support
section on our Web site
http://www.kramerelectronics.com
.
6.1.1
Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port on the
KDS-EN1
to the Ethernet port on your
PC via a crossover cable with RJ-45 connectors. This type of connection is
recommended for identification of the factory default IP Address of the
KDS-EN1
during the initial configuration.
To configure your PC after connecting the Ethernet port:
1. Right-click the
My Network Places
icon on your desktop.
2. Select
Properties
.
3. Right-click
Local Area Connection Properties
.