Kramer Electronics Ltd.
FC-7P
– Using Embedded Web Pages
22
When security is on, access to the Web UI is granted only on submission of a valid user and
password. The default user ID is
Admin
and the password is
Admin
.
To activate Web UI security
:
1. On the Security page, click ON.
The confirmation popup is displayed as shown in
Figure 20: Security Confirmation Popup
2. Click
OK
.
The Authentication Required popup is displayed as shown in
Figure 21: Authentication Required Popup
3. Enter the default username and password.
4. Click
OK
.
5. Wait until the Web UI has reloaded. Click the Security page button.
The page show in
Figure 22: Security Activated Page
6. If required, click
OFF
to turn security off, or change the password and click
Change
.