Kramer FC-7P, User Manual, Page: 16 / 58

Kramer Electronics Ltd.
FC-7P
– Using Embedded Web Pages
14
Loading and Saving Configurations
Loading and saving configurations is used for duplicating multiple device definitions for easy
system configuration. The configurations are loaded and saved to a local PC. Load and save
is performed using the buttons at the bottom left-hand side of the screen for all pages
displayed.
To load a configuration :
1. Click Load .
The Explorer window opens.
2. Browse to the required file.
3. Select the required file and click Open .
The device is configured according to the saved preset.
To save the current configuration :
1. Configure the device as required.
2. Click Save .
The Save File window opens.
3. Browse to the required location to which to save the file.
4. Enter the required name for the saved preset.
5. Click OK .
The current configuration is saved.
When using Chrome, the file is automatically saved in the Downloads folder.
The following parameters are saved to the configuration file:
UI Page Parameter
Device Settings ( Figure 11 ) Model Name
Time Zone
Daylight Savings Time mode
Use Time Server mode
Time Server Address
Sync Every Day time
Communication ( Figure 12 ) UDP Port
TCP Port
GPIO Port Settings ( Figure 13 ) GPIO Port
Trigger Type
Pull-up Resistor
Threshold VDC Range Min
Threshold VDC Range Max
Maximum Reported Steps