Kramer FC-21ETH, User Manual

Page: 56 / 60

52 Kramer Protocol 3000
Command - TIME-LOC Command Type - System
Command Name Permission Transparency
Set: TIME-LOC End User Public
Get: TIME-LOC? End User Public
Description Syntax
Set: Set local time offset from UTC/GMT
# TIME-LOC
␠
UTC_off,DayLight
␍
Get: Get local time offset from UTC/GMT
# TIME-LOC?
␍
Response
~nn@ TIME-LOC
␠
UTC_off,DayLight
␍␊
Parameters
UTC_off - Offset of device time from UTC/GMT (without daylight time correction)
DayLight - 0 - no daylight saving time, 1 - daylight saving time
Response triggers
Notes
If the time server is configured, device time calculates by adding UTC_off to UTC time (that it got from the
time server) + 1 hour if daylight savings time is in effect
TIME command sets the device time without considering these settings
Command - TIME-SRV Command Type - System
Command Name Permission Transparency
Set: TIME-SRV End User Public
Get: TIME-SRV? End User Public
Description Syntax
Set:
Set time synchronization from
server
# TIME-SRV
␠
mode, srv_ip, sync_hour
␍
Get: Get time synchronization settings
# TIME-SRV?
␍
Response
For Set: ~nn@ TIME-SRV
␠
mode,srv_ip,sync_hour
␍␊
For Get: ~nn@ TIME-SRV
␠
mode,srv_ip,server_status,sync_hour
␍␊
Parameters
Mode - 0 - disabled, 1 - enabled
srv_ip - time server IP address
sync_hour - hour in day for time sync
server_status - ON/OFF
Response triggers
Notes
Device must have a valid gateway (NTGT command) and DNS server (NTDNS command)