![background image](http://html.mh-extra.com/html/kramer/fc-10/fc-10_user-manual_2001525010.webp)
Kramer Electronics Ltd.
8
5.2
Getting to Know Your FC-10D
The KRAMER FC-10D Composite-YC Comb Filter/Transcoder was designed to interface between the two
popular video formats: Composite Video and YC (Super-Video). The decoding from composite to Y/C is done
digitally using an adaptive comb filter and DSP techniques to minimize dot-crawl and cross-color. A built-in
vertical enhancer circuit reduces noise and dot-crawl on the Y signal. In addition, the FC-10D provides an
independent Y/C to Composite route, for simultaneous bi-directional operation. The Kramer FC-10D is very
small in size, and is fed from an external 12VDC supply, ideal for fieldwork. Front/Rear panel features of the
FC-10D are described in Figure
2
and Table
3
.
NOTE
For operation instructions refer to section 9.
Figure
2
: FC-10D Front/Rear Panel Features
Table
3
: FC-10D Front/Rear Panel Features
No.
Feature Function
1. Power Switch
Illuminated switch supplies power to the unit.
2. Internal trimmers (bottom accessible)
Not used.
WARNING
!
Adjustments or attempted adjustments of the
trimmers are not allowed. Failure to comply with
this warning may damage the machine.
3. PAL pushbutton
Illuminated pushbutton: selects PAL system when pressed.
4. NTSC pushbutton
Illuminated pushbutton: selects NTSC system when pressed.
5. CV IN BNC connector
Composite video input.
6. YC OUT 4P connector
s-Video output.
7. YC IN 4P connector
s-Video input.
8. CV OUT BNC connector
Composite video output.
9. 12VDC feed connector
A DC connector that allows power to be supplied to the unit.