![background image](http://html.mh-extra.com/html/kramer/fc-10/fc-10_user-manual_2001525019.webp)
Kramer Electronics Ltd.
17
Figure
10
: Using PC Graphics in YC Production
10.3
Typical Composite/YC to Component/RGB Conversion
Figure
11
illustrates a typical set up of the Kramer format converters described in this manual: incoming input
signals from composite and YC (s-Video) sources are converted by a Multistandard Decoder (FC-4044, in this
case) to component and RGB output signals, that are then sent to two different acceptors. A Chroma
Keyer/Mixer may be connected in parallel to the RGB outputs in order to control the RGB display. A mixer is a
device used to combine video signals from two or more sources. Synchronized inputs are mixed with each other
and various special effects patterns and shapes are added in accordance with the proficiency of the video mixer
being used.
Perform the following steps (as necessary):
1.
Connect CV/YC sources to the inputs (FC-4044 in this case).
2.
Connect the outputs to two different RGB/component acceptors.
3.
Operate sources, acceptors and your machine.
4.
Use the front panel control functions if necessary (see section 9 for more details).