![KRAL BEM 300 Series Operating Instructions Manual Download Page 44](http://html1.mh-extra.com/html/kral/bem-300-series/bem-300-series_operating-instructions-manual_2000350044.webp)
44
OIE 15en Edition 2019-12 HW 2.0/SW 2.0
Operating Instructions
Glossary
Appendix
Tab. 1 Glossary
Pulse (signal)
□
A rising edge is followed after a certain period by a falling edge
□
Corresponds to the
square wave signal
Pulse input
□
Processes
pulse signals
Pulse output
□
Generates
pulses
with 24 V signal level conforming to the scale of
an input variable
Rate
□
Volume per time unit
Relay output
□
Potential-free change-over contact
Remote display
□
Additional display of the values of the
electronic unit
□
Communication via
bus interface
Reset
□
Setting the variable to the value 0
Resolution
□
Maximum number of possible subdivision steps for describing a
value
Return line
□
Line from the consumer back to the reservoir
Scale
□
Assigning of a maximum input value to a maximum output value
Serial interface
□
Sends or receives data in chronological sequence
Single-line measurement
□
The values of a volumeter are measured and evaluated
Square wave signal
□
Pulse signal
with square wave form
Supply line
□
Line from the reservoir to the consumer
Temperature
compensation
□
Consideration of the current temperature at the
volume
and
mass
calculation
in order to compensate density changes
Temperature input
□
Processes signals of a
temperature sensor
Temperature sensor
□
Converts the physical value temperature into an electrical value
(e.g. resistance)
Threshold
□
Value at which an action is triggered when it is overpassed or
underpassed
Total
□
Volume values that have been measured since the last reset
Total consumption
□
Quantity that has been consumed since the last reset
Total flow
□
Quantity that has passed the volumeter since the last reset
Updating rate
□
Shortest period in which a change is displayed in the display
Volume calculation
□
The volume is converted to a standard temperature by means of the
density table and the temperature
Volume measurement
□
The volume that passes the volumeter is calculated from the
K-
factor
[P/l] and the pulses of the volumeter
Volumeter
□
Flow rate measuring device
Term
Meaning
Summary of Contents for BEM 300 Series
