KPS 603550020, User Manual

Page: 112 / 245

20 USER MANUAL
CHAPTER 3 INSTALLATION INSTRUCTIONS
(GLWLRQRIDQDO\VLVREMHFWSURSHUW\
In the data list containing temperature measurement object information, select any analysis object,
and left double-click the name of the analysis object, so that the system will automatically pop up the
DPDLQLQWHUIDFHIRUHGLWLQJWKHDQDO\VLVREMHFWDQGWKHV\VWHPVXSSRUWVWKHPRGL¿FDWLRQWRWKHQDPH
W\SHUHÀHFWLYLW\GLVWDQFHKXPLGLW\WHPSHUDWXUHDQGDODUPVHWWLQJV6HH)LJXUH
)LJXUH
6WDUWXSRIKLJKORZWHPSHUDWXUHDODUP
Support the temperature alarm function for analysis object. See Figure 3-16:
+LJK7HPSHUDWXUH$ODUP 6HWWKHDLJK7HPSHUDWXUH
$ODUP´DQGVHWWKHKLJKWHPSHUDWXUHDODUPWKUHVKROG,IWKH
maximum temperature of the analysis object is greater than
the set threshold, the analysis object constantly flickers to
remind, otherwise there is no alarm.
/RZ7HPSHUDWXUH$ODUP 6HWWKHDODUPDV³/RZ7HPSHUDWXUH
$ODUP´DQGVHWWKHORZWHPSHUDWXUHDODUPWKUHVKROG,IWKH
minimum temperature of the analysis object is less than
the set threshold, the analysis object constantly flickers to
remind, otherwise there is no alarm.
+LJKWHPSHUDWXUHORZWHPSHUDWXUHDODUP : Set the alarm
DV³+LJK7HPSHUDWXUH/RZ7HPSHUDWXUH$ODUP´DQGVHW
the high temperature alarm threshold and low temperature
alarm threshold. If the maximum temperature of the analysis
object is greater than the set threshold and the minimum
temperature thereof is less than the set threshold, the
DQDO\VLVREMHFWFRQVWDQWO\ÀLFNHUVWRUHPLQGRWKHUZLVHWKHUH
is no alarm.
)LJXUH