TR8100VHO Thermos t at I nstructions
ver 1.0
LCD symbols
See overleaf for further setting up information
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essenti al that the clock time and day are set accurately if you requir e your programmed events
1) Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
2) Press to move to the Day setting and use the u p and down arrows to get to the correct day.
3) Press to store and exit.
to start on time. To set follow the steps below:
Page1
The buttons are locked
Room temperature
Automatic mode,
Manual mode
ROOM TEMP
executes the programmed schedules
The sensor is not being read by the thermostat
Err
Temporary temperature override
Turn on the thermostat by pressing
AUTO
Override
Symbol
Symbol
Event
Event
Program number
Economy temperature
Comfort temperature
Configuration Menu
To enter into the setting menu please follow the steps below:
Step 3, Use the up and down arrows to adjust the settings.
Step 4, Press to move to the next Menu and once y ou have all the menu options set,
Setp 5, Press to accept and store.
Step 1, Turn the thermostat off by pressing ;
Step 2, Press , you will then see menu 1.
OFF
NEXT
NEXT
DONE
DONE
MENU
Menu #
Switching Differential
Temperature Calibration
Temperature Format
Clock Format
24 (default), 12- hour or 24-hour clock format
1
2
3
4
5
Feature
Explanation
Adjustment
1 =1°C , 2=2°C....etc ( 1°C by default)
-1 = decrease 1 °C , 1 = increase 1 °C ...
(press up & down buttons to adjust)
The number of degrees difference before switching.
The default is 1°C which means the thermostat will switch
the heating on 0.5°C below the set temperature and will turn
it off 0.5°C above the set temperature.With a 2°C differential
the heating will switch on 1°C below the set temperature
and will switch off 1°C above the set temperature.
This is to recalibrate the temperature if required.
This alows the temperautre to be set to show °C or °F.
You can select the clock to show in either 12 or 24 hour time
5+2 / 7 Day Mode
5+2 Day mode: this mode allows you to program 5 days
(Monday to Friday) at once, then the 2 days of the weekend separately
7 Day mode : this mode allows you to program a full 7 days
1 = 5+2 day programmable
2 = 7 day programmable
C = °C , F = °F
heat
on
on
at the same time or 7 days separately