KPS 603550020, User Manual

Page: 114 / 245

22 USER MANUAL
CHAPTER 3 INSTALLATION INSTRUCTIONS
)XVLRQYDOXHFKDQJH
Move the mouse pointer to the value area below the fusion interface, and then use the mouse wheel to
slide up and down, and click the button to modify. See Figure 3-19,
)LJXUH
5LEERQDQGWHPSHUDWXUHLQWHUYDO
5LEERQFKDQJH
9 ribbons are available for switching, so that the user is free to select and change the ribbon range.
Click the button [
] to display the ribbon panel, then the user is free to select and restore display of
any ribbon. See Figure 3-20:
)LJXUH
&XVWRPWHPSHUDWXUHLQWHUYDO
adjust the slide bar at the temperature adjustment zone to change display of the color corresponding
to temperature of infrared picture. Color of the corresponding temperature can be viewed at the
temperature display area. See Figure 3-21:
)LJXUH
Click the button [ $XWR ] to restore default state.
Click button [ ] to save all analysis object and custom ribbon data of the current picture. See the
¿JXUHEHORZ