24
KPS-PA40 • Digital clamp meter
ENG
2 Set rotary switch at desired Hz position.
3 Push Hz% button to select% mode and connect the test lead tips in parallel
with the circuit to be measured.Be careful not to touch any electrical conduc-
tors.
4 Read the measure result directly from LCD display.
9. SPECIFICATIONS
Accuracy is given as ±(% of number of least significant digits) at 18”C
to 28”C,with relative humidity up to 80%. All specifications assume less than
one year since calibration.
9.1 GENERAL SPECIFICATIONS
Maximum voltage
CAT II 1000V and CATIII 600V
Display
LCD 3999 counts, Updates 2-3/seg.
Ranging method
Auto range mode
Polarity indication
“-“ display for negative polarity
Overrange indication
Only figure “OL” on the display
Jaw capability
42mm (max conductor size)
Power
Battery 9V IEC 6F22 JIS 006P NEDA
1604
Low battery
Symbol “
” appears on the display
Operating temperature
5 ºC to 35°C
Storage temperature
-10 ºC to 50°C
Temperature coefficient
0,1 x 1xspecified accuracy / °C (<18°C
or > 28°C)
Altitude
2000 m
Size
250mm x 99mm x 43mm
Weight
Approx. 480 g.
