Page 3
OPERATING INSTRUCTIONS
1.
Carefully read this ‘Operating & Maintenance’ manual completely prior to lighting this stove for the first
time.
2.
Clean all markings from any plated surfaces with a soft cloth and Windex type cleaner. Never use
anything abrasive on any surface of this stove.
3.
Clean both sides of the glass with a ‘Windex’ type cleaner.
4.
Make sure the dealer or installer has thoroughly demonstrated operating sequence and maintenance
requirements.
5.
Complete warranty information and return to:
Kozy Heat Fireplaces
Attention: Warranty Registration
P.O. Box 577
Lakefield, Minnesota 56150.
6.
Please be aware that it will be normal for the stove to give off some odors during the initial burning of the
stove. This is short-term and the result of paint curing and other agents used in the manufacturing
process.
7.
This stove will become
HOT WHILE IN OPERATION
. Keep children, clothing, and furniture away from all
stove surfaces. Direct contact with the stove surfaces while operating may cause severe burns.
8.
This stove has safety interlock switches built into the circuit control board which will not allow
continuous burning in the event of a problem. Keep the door and ash drawer closed and completely
latched whenever this stove is in operation. Keep the hopper lid completely closed whenever this stove
is in operation. If the hopper lid is left opened, the control board will continue to operate as normal, but
the auger will not run.
9. All exhaust connections must be tightly sealed to prevent the possibility of carbon monoxide from
entering the home.
10.
The combustion air intake pipe must be connected to an outside source for fresh air. This will prevent
smoke back into the house in some circumstances.
