#BAY-36-L & BW R.8 July 2019
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FACING AND FINISHING
21
4.2 Finishing Trim Kit Assembly #B36-FTK
IMPORTANT: This trim kit assembly must be attached before fireplace
installation.
NOTE: The top trim panel must be installed with the top stand off
brackets.
1. If installed, remove and discard the existing bottom frame piece.
2. Install the bottom trim panel with the flange positioned as
shown below.
3. If installed, remove the top stand-offs.
4. Install the top trim panel. Align the holes in the top trim panel
with the front holes in the stand-offs and attach to the fireplace
top. Secure with the screws previously removed and included in
the components packet.
5. If installed, remove the nailing flanges from the sides of the
fireplace.
6. Install side trim panels, utilizing the existing screws from the top
and bottom sides of the fireplace. Install nailing flanges after trim
panels, using screws previously removed. Use screws included in
the components packet to complete side panel installation.
Figure 4.5, Finishing Trim Kit Installation #B36-FTK