Kowa KGC-01 Instruction Manual Download Page 2

 

Introduction

 

 

Thank you very much for purchasing the KOWA LUBRICATING SYSTEM. 
This Instruction Manual has been compiled as a practical guide for the operation and 
maintenance of the Grease Checker. 
All descriptions contained herein are based on the standard system, which may, therefore, be 
different from those of the purchased system. Such a problem can be solved by referring to the 
final specifications. However, it is required to understand that some changes caused by the 
modification of equipment may not be described in the final specifications. 
 

Warranty

 

 
The warranty period for this system will be one year from the commencement of operation. 
Any defect or failure occurring during the warranty period, for which KWK is liable in design and 
manufacturing, shall be corrected and / or eliminated by KWK without compensation. 
However, any defect or failure caused by improper operation which is not described in this 
Instruction Manual shall not be guaranteed, even though the defect or failure occurs witch the 
guaranteed period. 
 

Contact 
 

If you have any suspicions or questions in this instruction manual, please contact our distributor 
which supplied this device. 
 

Parts order 
 

Please order from our distributor that provided this device. 

Summary of Contents for KGC-01











Reviews: