4-10
Now the
30%
is flashing!
The setting range: 10~50 % .
Setting unit: 10 %.
Press button to return to the previous fuel
sensor impedance setting screen.
EX. Now the setting is changed from 30 % to 20 %.
Press button to enter the insufficient fuel
warning setting screen.
EX. Now 100
Ù
is changed to 510
Ù
.
Fuel sensor impedance & insufficient fuel warning setting instruction
Press button 10 times (Or the button
2 times) to select the fuel impedance &
insufficient fuel warning setting screen.
Press button to enter the fuel impedance
& insufficient fuel warning setting screen.
EX. Now the fuel sensor impedance setting is
100
Ù
and the insufficient fuel warning is 30 %.
P.S.
P.S.
Usually the fuel sensor impedance setting is 100
Ù
for
YAMAHA models, and 510
Ù
for the HONDA models,
but sometimes it will differ depending on the model.
The insufficient fuel warning setting: if the fuel is less
than the value you set, it will flash. (Like fig. right)
Fuel sensor impedance setting range:
100
Ù
, 510
Ù
and no display.
Now the
100
Ù
is flashing!
If you just want to check the setting, press
button to return to the main screen.
Press button or to select the number
you want to input.
NEXT PAGE
Next page
Press button or to select the number
you want to input.
Press button or to select the other
setting screens.
Enter
Exit
Do
wn
If you just want to make the setting, press
button to back to the main screen.
Cortesia de www.motomarcadores.com
Cortesia de www.motomarcadores.com
