5-1
Target speed timer test
The
record
display
screen
Enter
the
testing
screen
if
no
record
Enter
the
testing
screen
NEXT PAGE
Next page
Next page
During the test.
WARNING!
Please use this function at racetrack to avoid
traffic accidents.
Please start the test when the bike stops.
If you have the power test record, it will
display the record first. You must clear the
record before starting a new test.
When the bike moves, the timer will start
automatically.
About the power test setting, please
check
4-11
.
When you reach the target speed you set (0~120
km/h), the timer will stop counting (19.1 second).
EX. The dotted line means the previous record,
and the true line means the new record.
For example, the previous record on the left side
curve means the time to reach 120 km/h is 19.2
seconds, and the distance you need is 640 meter.
And the new record is 19.1 seconds, and the
distance is 639 meter.
0
km/h
3
km/h
120
km/h
In the power test screen, press once (Or the
button 3 times.) to enter the target speed
timer test screen.
Press button to enter the test standby
screen.
EX. The target speed timer test setting is 0~120
km/h, the time to reach the speed is 19.2
seconds, and the distance you need to reach
the speed is 640 meter.
If you just want to check the record, press
button to back to the main screen.
Now the target speed timer is flashing!
The timer and trip meter will
start to count automatically
when your bike moves. When
you reach the target speed
you set, the timer and trip
meter will stop counting
automatically.
Speed up
P.S.
P.S.
If the speed you set is too low (For example
30~60 km/h), the curve will disconnect
because the sampling is not enough.
Cortesia de www.motomarcadores.com
Cortesia de www.motomarcadores.com
